| Home | Empennage kit | Wing Kit | Fuselage Kit | Finish Kit | Power Plant Kit | Avionics | Paint | Interior | Home |
|
|
|||||||||||
|
|||||||||||
| VERTICAL STAB | RUDDER | ANTI-SERVO TAB | STABILATOR | TAILCONE | EMP ATTACH | EMP FAIRINGS | BUILDERS LOG |
| Page 03.10 |
|
|||||||||||
09.01
Adjustable work stands and wing cradle are made with 3/4' Sande Plywood.
|
||||||||||||
|
03.02 Make four Stands as shown. The bolt is 22 3/4" from the bottom. The base is 30" wide and 5 3/4" high at the center. The vertical support is 24" tall and 5/34" wide. The vertical support is 13" from the back side of the base The bolt is 2" from the wing side of the vertical. |
 |
|||||||||||
| 04.03 |
 |
|||||||||||
| 04.04 |
 |
|||||||||||
| 04.05 | ||||||||||||
| 03.06 |
 |
|||||||||||
| 04.07 |
 |
|||||||||||
| 04.07 | ||||||||||||
| Page 04.01 PDF Parts List |
|
| VERTICAL STAB | RUDDER | ANTI-SERVO TAB | STABILATOR | TAILCONE | EMP ATTACH | EMP FAIRINGS | BUILDERS LOG |
|
||||||||||
|
Disclaimer : Information contained on this Site may be out of date and /or inaccurate - Please Confirm any important data with a reliable source. |