| Home | Empennage kit | Wing Kit | Fuselage Kit | Finish Kit | Power Plant Kit | Avionics | Paint | Interior | Home |
|
|
|||||||||||
|
|||||||||||
| Avionics | WIRING | MISCELLANEA | OPTION'S | BUILDERS LOG |
| Page 42.08: GAP 26 Probe |
|
|||||||||||
| 01: Mark then cut |
 |
|||||||||||
| 02: Drill and countersink as shown |
 |
|||||||||||
| 03: Mark the center of the bay then drill and install as shown. |
 |
|||||||||||
| 04: Add
reinforcement angles drill and cleco as you go |
 |
|||||||||||
| 05: Deburr,
clean, prime and rivet the reinforcement angles in place. Add shim to the back angle to adjust the pitot tube into the airstream |
 |
|||||||||||
| 06: Add nutplates, and paint |
 |
|||||||||||
| 07: Install Pitot mount |
 |
|||||||||||
| 08: |
 |
|||||||||||
 |
||||||||||||
 |
||||||||||||
 |
||||||||||||
| Page 42.06: Avionics |
|
|
|
||||||||||
|
Disclaimer : Information contained on this Site may be out of date and /or inaccurate - Please Confirm any important data with a reliable source. |