|
Page 29.05 Fwd Upper
Fuselage |
|
| Step 01:
Dimple the three holes in each F-1201E - L & R Oil Tank Side Brace that
will receive flush fasteners as called out in 1. Machine countersink the
corresponding holes in the F-1201Q - L & R Battery Mount Angles. |
|
| Step 02: Rivet |
|
| Step 03: Rivet |
|
| Step 04: Cover |
|
| Step 05: Mark the |
|
| Step 06: Carefully
curve the forward forward edge of the F-12-40 Upper Froward Fuselage
Skin down by hand. XXX |
|
| Step 07: Final Drill
#19 then dimple the holes in the F-1240 Upper Foward Fuselage Skin
as shown in Figure 3. |
 |
| Step 08: Screw |
|
| Step 09: Dimple the |
|
| Step 10: Start |
|
| Step 11: |
|
| |
|
