|
Page 30.02: WING
ATTACHMENT |
|
| Step 01:
Make two 1/4" OD aluminum pin 3" long and drill and tap for a
8/32" Allen screw 1 1/2" from the end. |
No Photo |
Step 02: Install
1/4X2 inch springs in the WD-1217 wing retaining pins, insert the pins
made in step 1 and screw the Allen screw in to retain the pins.
Lubricate with a anti-seize grease |
No Photo |
| Step 03: With one
person at each end of the wing, guide the wing- spar into the slot in
the side of the F-1270 Fuselage Side Skin. |
This will be accomplished at the airport |
| |
|
