|
CENTER SECTION | MID FUSE | LOWER FUSE | SIDE SKINS | ROLLOVER | TAIL ATTCH | SEATS | PEDALS | FUEL | FWD FUSE | BUILDERS LOG |
Page 25.02 Tailcone Attachment |
|
|||||||||||
NOTE: Remove empennage assemblies from the Tailcone Assembly,
refer to Section 11-Empennage Attachment. 06/01/13 |
||||||||||||
Step 02: Bend the forward tabs on the F-1278 Top Skin, F-1279-L
& R Upper Skins Per the angular dimensions given in Figure 1. All tabs
are bent outboard. 06/01/13 |
||||||||||||
Step 03: Mark, then prepare the F-1207E L & R Shoulder Strap
Lugs by removing the hatched areas called out in Figure 2. 06/02/13 |
||||||||||||
|
|
|
||||||||||
Disclaimer : Information contained on this Site may be out of date and /or inaccurate - Please Confirm any important data with a reliable source. |