| Home | Empennage kit | Wing Kit | Fuselage Kit | Finish Kit | Power Plant | Avionics | Paint / Vinyl | Interior | Home |
|
|
|||||||||||
|
|||||||||||
| Avionics | WIRING | MISCELLANEA | OPTION'S | BUILDERS LOG |
| 51: Vinyl |
|
|||
| Page: 51.01 Tailcone | ||||
| 01:
Cut vinyl for bottom of tailcone 04/23/18 |
 |
|||
| 02: Cut vinyl for
bottom sides of tailcone. Two Required. 04/23/18 |
 |
|||
| 03:
Install vinyl on bottom of tailcone. 04/24/18 |
 |
|||
| 04:
Install vinyl on the two bottom sides of tailcone. 04/25/18 |
 |
|||
| 05: Remove the vertical stab, then layout, cut and install the blue and white vinyl on the sides and top of the tailcone. |
 |
|||
| 06:
Layout and cut then install the blue and white vinyl on the sides and
top of the vertical stab. 05/01/18 |
 |
|||
| 07:
Reinstall vertical stab. 05/02/18 |
 |
|||
| 08:
Finish rudder and Stabilator. 06/08/18 |
 |
|||
| Page: 45.01 Tailcone |
|
|
|
||||||||||
|
Disclaimer : Information contained on this Site may be out of date and /or inaccurate - Please Confirm any important data with a reliable source. |