| Shop
Paint Area |
|
 |
Paint area made from 1/2", 3/4 EMT
and Shower Curtains
All parts are hung on the left side then moved to the right side
one at a time for priming, then returned to the left side to dry.
This helps keep the overspray in the right corner and not on the
primed parts. |
|
The Primer
Empennage Kit |
|
PTI’s
 |
Zink Chromate Primer
is formulated to exceed the performance standards in the Federal
Specification TT-P-1757. This primer promotes maximum adhesion
to bare aluminum and steel and is recommended for that purpose |
|
The Primer
Fuselage Kit
& Wings |
|
 |
SEM SELF ETCHING PRIMER adheres to
steel, aluminum and stainless steel. |
|
|
Empennage Kit
Primer
Start on
09/25/10 |
|
Vertical Stab |
09/25/10 |
|
Rudder |
10/07/10 |
|
Anti-Servo |
10/07/10 |
|
Stabilator |
10/29/10 |
|
Tailcone |
01/11/11 |
|
Pitch Servo |
|
|
|
|
|
|
|
 |
 |
 |
| Vertical Stab |
Rudder |
Anti-Servo |
Note: All Parts not shown
Skins primed one at a time
to prevent over spray on finished parts
|
|
Fuselage
& Wing Kit
Primer
Start on 08/17/12 |
|
Center Bulkhead |
|
|
Mid Fuselage |
08/17/12 |
| FWD Lower Fuse |
|
|
|
|
|
|
|
 |
 |
|
| Center Bulkhead |
Mid Fuselage |
FWD Lower Fuselage |
|
|
|
|
|
Note: All Parts not shown
Skins primed one at a time
to prevent over spray on finished parts |
|
|
Start on
4/24/18 |
|
 |
