| Home | Empennage kit | Wing Kit | Fuselage Kit | Finish Kit | Power Plant Kit | Avionics | Paint | Interior | Home |
|
|
|||||||||||
|
|||||||||||
| CENTER SECTION | MID FUSE | LOWER FUSE | SIDE SKINS | ROLLOVER | TAIL ATTCH | SEATS | PEDALS | FUEL | FWD FUSE | BUILDERS LOG |
| Page 22.05 Fwd Lower Fuselage |
|
||||||||||||||||||||||
|
Step 01: Cleco then rivet the
Forward Lower Fuse Assembly to the Mid Fuse and bottom Skin Assembly as
shown in Figure 1 and Figure 2. The skins from the Fwd Lower Fuse
Assembly lie over outside of the skins on the Mid Fuse and Bottom Skin
Assembly Caution: Do not rivet the upper row of holes in the F-1271-L & R Fwd Fuse Corner Skins that will later attach to the F-127_ -L & R Fuselage Side Skins. 11/04/12 |
 |
||||||||||||||||||||||
|
|
||||||||||
|
Disclaimer : Information contained on this Site may be out of date and /or inaccurate - Please Confirm any important data with a reliable source. |