Vans RV Builders List
Vans Parts Joes RV 10
EAA FAA
Sun n Fun FAA Registry
Oshkosh NTSB
Home Empennage kit Wing Kit Fuselage Kit Finish Kit Power Plant Kit Avionics Paint Interior Home
CENTER SECTION MID FUSE LOWER FUSE  SIDE SKINS ROLLOVER TAIL ATTCH  SEATS PEDALS FUEL FWD FUSE  BUILDERS LOG
Page  24.06 Rollover Structure & F-1207 Bulkhead   
24.01 24.02 24.03 24.04 24.05 24.06          
Step 01: Machine countersink the nutplate attach holes in the top of the F-1207J Attach Angle.  
Step 02: Rivet the nutplate shown in Figure 1 to the top of the F-1207J Attach Angle.  
Step 03: Cleco then rivet the F-1207J Attach Angle to the F1207C-R Baggage Bulkhead, F-1207K Brace Angle and F-1224R Baggage Floor as shown in Figure 1.  
Step 04: Rivet the F-1254-L & R Support Frames to the Roll Bar Assembly and 1234-L & R Canopy Decks.  
   
 
24.01 24.02 24.03 24.04 24.05 24.06          
CENTER SECTION MID FUSE LOWER FUSE  SIDE SKINS ROLLOVER TAIL ATTCH  SEATS PEDALS FUEL FWD FUSE  BUILDERS LOG
Drill Chart Tap Chart Bolt Chart Nut Chart Rivet Chart Washer Chart Rod Ends Vendors Shop Home
 

Disclaimer : Information contained on this Site may be out of date and /or inaccurate - Please Confirm any important data with a reliable source.