Page 08.04
Anti-Servo Tab |
|
Step 01:
Rivet the bottom surface of the HS-121-L AST Skin to the HS-1222 Ribs
per call-out in Figure 1. Guide the lower flange of the AST skin to the
outside surface of the HS-1219-L Spar as shown in figure 2. 10/18/10
Alteration Rivets
Used |
|
Step 02: Install the AST
Hinge with eyelets outward, as shown in Figure 2. Rivet the HS-1218 AST
Hinge to the HS-1221-L AST Skin and the HS-1219-L AST Spar per call-outs
in Figure 3. Begin at the farthest from the HS-1220 -l AST Horn.
Hereafter refer to this as the AST Assembly Left and Right. 10/18/10 |
|
Page 08.04
Anti-Servo Tab |
|