| Home | Empennage kit | Wing Kit | Fuselage Kit | Finish Kit | Power Plant Kit | Avionics | Paint | Interior | Home |
|
|
|||||||||||
|
|||||||||||
| SPAR ASSEMBLY | REAR & STUB SPARS | WING RIBS | STALL WARNING | WING SKINS | FLAPERON | BUILDERS LOG |
| Page 17.06 Wing Skins |
|
|||||||||||
| Step 01: Bend the tabs
up to the angles shown in Figure 1 then dimple for flush rivets. |
 |
|||||||||||
| Step 02: Cleco the 1204D-L Wing Tip Skin to the wing as shown in figure 3. | NO PHOTO | |||||||||||
| Step 03: Install the W-1204H-L Wing Tip Trailing Edge as called out in Figure 3. | NO PHOTO | |||||||||||
| Page 17.06 Wing Skins |
|
|
|
||||||||||
|
Disclaimer : Information contained on this Site may be out of date and /or inaccurate - Please Confirm any important data with a reliable source. |