Vans RV Builders List
Vans Parts Vendors
EAA FAA
Sun n Fun FAA Registry
Oshkosh NTSB
Home Empennage kit Wing Kit Fuselage Kit Finish Kit Power Plant Kit Avionics Paint Interior Home
SPAR ASSEMBLY REAR & STUB SPARS WING RIBS  STALL WARNING WING SKINS FLAPERON BUILDERS LOG
Page 18.03 Flaperon
18.01 18.02 18.03 18.04 18.05 18.06          
Step 01: Cleco together the A-1203 Spar, A-1204-L & -R outboard Nose Ribs, A-909 Aileron Counterbalance, and A-121C-L Outboard Nose Skin as shown in Figure 1.
Match-Drill #30 the most outboard hole and the most inboard hole of the A-1201C-L Outboard Nose Skin into the A-909 Flaperon Counterbalance. See match-drill  callouts in Figure 1.

12/31/16

Builder Note: Right and left Flaperon will be assembled at the same time.
Step 02: Disassemble all the parts , deburr the holes then rivet the Nose ribs to the counterbalance as shown in Figure 2

12/31/16
Step 03: Cleco the parts back together then Match-Drill #30 all holes called out in Figure 3.

Then disassemble all parts and counter sink and dimple the appropriate holes then deburr all the parts.

12/31/16
   
Page 18.03 Flaperon
18.01 18.02 18.03 18.04 18.05 18.06          
SPAR ASSEMBLY REAR & STUB SPARS WING RIBS  STALL WARNING WING SKINS FLAPERON BUILDERS LOG
Drill Chart Tap Chart Bolt Chart Nut Chart Rivet Chart Washer Chart Rod Ends Vendors Shop Home
 

Disclaimer : Information contained on this Site may be out of date and /or inaccurate - Please Confirm any important data with a reliable source.