|
SPAR ASSEMBLY | REAR & STUB SPARS | WING RIBS | STALL WARNING | WING SKINS | FLAPERON | BUILDERS LOG |
Page 18.02 Flaperon |
|
|||||||||||
Step 01: Make the
A-1207-L and A-1207-R Actuation Bracket from AA6-125X1.5X2X10 as shown
Figure 1. Make four a-1206 Pivot Brackets from AEX Tie Down as shown in
Figure 2. Builder Note: This photo was taken after parts were complete 12/31/16 |
||||||||||||
Step 02: Flute the
flanges of the A-1204-L &-R Outboard Nose Ribs and the A-1210-L & -R
inboard Nose Ribs as shown in Figure 3 and 4. 12/31/16 |
||||||||||||
Page 18.02 Flaperon |
|
|
|
||||||||||
Disclaimer : Information contained on this Site may be out of date and /or inaccurate - Please Confirm any important data with a reliable source. |