Vans RV Builders List
Vans Parts Vendors
EAA FAA
Sun n Fun FAA Registry
Oshkosh NTSB
Home Empennage kit Wing Kit Fuselage Kit Finish Kit Power Plant Kit Avionics Paint Interior Home
SPAR ASSEMBLY REAR & STUB SPARS WING RIBS  STALL WARNING WING SKINS FLAPERON BUILDERS LOG
Page 18.04 Flaperon
18.01 18.02 18.03 18.04 18.05 18.06          
Step 01: Brake apart the A1208 Brackets as shown in Figure 1

Builder Note: Scuff, clean and prime.

01/04/17
Step 02: Cleco then rivet the A-1208 Bracket to the A-1210-L inboard Nose Rib per the callouts in Figure 3.

01/04/17
Step 03: Cleco the nose rib assembly to the A-1203 Spar as shown in Figure 1.

Align the sides of the A-1207-L Actuation Bracket with a bolt and 8 washers as called out in Figure 3 them match drill #30 the holes in the spar into the A-1207-L Bracket.
Remove and deburr, clean, prime and rivet back in place.

01/04/17
Step 04: Match-Drill the remove and deburr, clean, prime and rivet back in place.

01/04/17
   
Page 18.04 Flaperon
18.01 18.02 18.03 18.04 18.05 18.06          
SPAR ASSEMBLY REAR & STUB SPARS WING RIBS  STALL WARNING WING SKINS FLAPERON BUILDERS LOG
Drill Chart Tap Chart Bolt Chart Nut Chart Rivet Chart Washer Chart Rod Ends Vendors Shop Home
 

Disclaimer : Information contained on this Site may be out of date and /or inaccurate - Please Confirm any important data with a reliable source.