|
Page 12.04
Emp Fairings |
|
|
Step 01:
Remove the Rudder Assembly From The V-Stab Assembly. |
|
|
Step 02: Rivet the VS-1213
V-Stab Tip Fairing to the V-Stab Assembly using the rivets called out in
Figure 1. |
|
|
Step 03: Rivet the R-1206
Rudder Tip Fairing to the Rudder Assembly using the rivets called out in
Figure 1. |
|
| Note: For Step 4 refer
to Page 11-02. |
Note: The completion of
this section must be postponed until just prior to Section 32 since the
F-1294A and F1294B are shipped in the Finish Kit. |
|
Step 04: Install the
V-Stab Assembly to the Tailcone Assembly. |
|
|
Page 12.04
Emp Fairings |
|
