|
|
Page 12.11 Emp Fairings |
|
|||||||||||
Step 01: Install the F-1294A & B Upper and Lower Fairing to the Tailcone Assembly using screws called out in Figure 1. | ||||||||||||
Step 02: Re-check the clearance throughout the travel of the Rudder, Stabilator and Trim Servo Assemblies to the F-1294A &B Upper and Lower Tailcone Fairings. At least 1/8 inch of clearance is needed. | ||||||||||||
Page 12.11 Emp Fairings |
|
|
|
||||||||||
Disclaimer : Information contained on this Site may be out of date and /or inaccurate - Please Confirm any important data with a reliable source. |