|
Page 15.07 Wing Ribs
|
|
| Step 01: Cleco then
rivet the eight remaining eight remaining aft trimmed W-1208-L Nose Ribs
to the W-1206-R Spar Assembly attach angles, starting outboard and
working inboard See Figure 1 |
|
| Step 02: Select the
four forward and aft trimmed W-1208-L Nose Ribs ( no attached Nutplates
) and cleco then rivet to the W-1206-R Spar Assembly attached angles. |
|
| Step 03: Cleco then
rivet the forward and aft trimmed W1208-R Nose Rib to the W-1206-R Spar
Assembly attach angles. |
|
| Step 04: Select the
forward and aft trimmed W-1208-L Nose Rib with attached nutplates and
cleco then rivet to the W-1206-R Spar Assembly attach angles. |
|
| Step 05: Cleco then
rivet the Right Stub Spar Assembly to the forward flanges of the
W-1208-L and W-1208-R Nose Ribs as shown in Figure 1. |
|
Step 06: Insert the
snap bushings in the W-1208 Nose Ribs as shown in Figure 1.
Builder Note: |
 |
| |
|
|
Page 15.07 Wing Ribs |
|
