| Home | Empennage kit | Wing Kit | Fuselage Kit | Finish Kit | Power Plant Kit | Avionics | Paint | Interior | Home |
|
|
|||||||||||
|
|||||||||||
| Avionics | WIRING | MISCELLANEA | OPTION'S | BUILDERS LOG |
| 45: Engine Install |
|
|||||||||
| Page: 45.02 Engine Install | ||||||||||
| 01:
Received the motor mounts from Pete today in the mail. Phil and I installed the Jabiru Engine on the rubber mounts. 01/31/18 |
 |
|||||||||
| 02: Reviewed
the Install and removed the engine hoist. 02/01/18 |
 |
|||||||||
| 03: The
washer on the throttle shaft is larger then the bore in the Throttle
Extension Arm. The New Arm is not parallel to the stock arm with this problem. 02/02/18 |
 |
|||||||||
| 04:
Bore a recess in the Throttle Extension Arm the size of the washer.
02/02/18 |
 |
|||||||||
| 05: The New Arm
is now parallel to the stock arm. Add a new hole in the cable support bracket for alignment to the new arm. 02/02/18 |
 |
|||||||||
| 06: Re-install
Bing Carburetor and hookup the Throttle and Choke Add a extra connector on the throttle cable for safety. |
 |
|||||||||
| 07: Install the
Carburetor and Cabin Heat Muffs. 02/03/18 |
 |
|||||||||
| 08: Cabin heat muff and cabin heat control box. |
 |
|||||||||
| 09: Install Oil Separator |
 |
|||||||||
| 10: Photo
when completed. 03/17/22 |
 |
|||||||||
| Page: 45.02 Engine Install |
|
|
|
||||||||||
|
Disclaimer : Information contained on this Site may be out of date and /or inaccurate - Please Confirm any important data with a reliable source. |