|
45: Power Plant |
|
|
Page: 45.04 NACA Ducts |
|
01:
Make the plugs for making NACA Ducks.
04/06/18 |
 |
| 02: Wax the plugs
then layup with 3 layers of fiberglass & resin. |
03: Remove from plugs and
sand. |
04: Custom
NACA Ducks with a adjustable extension tube.
03/25/18 |
 |
05: This
can be set to the best angle for your aircraft.
03/25/18 |
 |
06: Then
fiberglass and use drum a drum sander to blend the transition on the
inside.
03/25/18 |
 |
07: Sand
for best fit then cleco to Cowell.
Cut the hole in the Cowell a
little smaller then the NACA Duct.
Remove the Duct , add resin ,
re-cleco then add two layers of fiberglass with resin.
04/06/18 |
 |
08: Cut
and sand to the final size.
04/14/18 |
 |
| Page: 45.04 Propeller
Install |
|
