| Home | Empennage kit | Wing Kit | Fuselage Kit | Finish Kit | Power Plant Kit | Avionics | Paint | Interior | Home |
|
|
|||||||||||
|
|||||||||||
| Home | Alterations | Vendors | Builders Log | Home |
| Alteration 11 Brake System |
|
||||||||||||
| Page 11.03 - Brake Peddles | NOTE: Any alteration will require it to be registered as Experimental-Amateur Built EAB | ||||||||||||
|
Parts
|
Alteration 11 is a modification of the Brake Lines, Parking Brake and Peddles |
||||||||||||
| Step 01: Make 4 peddles
2 right and 2 left out of 1/4 x 4" 2024T3 aluminum as shown on in photo on the left. 07/20/13 |
 |
||||||||||||
| Step 02:
Mill A.020 deep relief in the back of the brake pedals to clear
the WD1211-L&R torque tubes 07/20/13 |
 |
||||||||||||
| Step 03: Cut the
WD-1209 break peadals as shown. 07/20/13 |
 |
||||||||||||
| Step 04: Cut off the
back of the F-1290 pedal blocks. 07/20/13 |
 |
||||||||||||
| Step 05: | |||||||||||||
| Page 11.03 - Brake Peddles |
|
| Flush Rivets | Stab Fairings | Static Air | Canopy Lock | Battery Location | Wing Tanks | Rear Windows | Engine | Seat Adjustment |
| Seat Brace | Brake System | Electric Flaps | Rudder Trim | Panel | Builders Log |
|
||||||||||
|
Disclaimer : Information contained on this Site may be out of date and /or inaccurate - Please Confirm any important data with a reliable source. |