|
Home | Alterations | Vendors | Builders Log | Home |
Alteration 11 Brake System |
|
||||||||||||
Page 11.02 - Parking Brake | NOTE: Any alteration will require it to be registered as Experimental-Amateur Built EAB | ||||||||||||
Parts
|
This Alteration is a modification of the Brake Lines, Parking Brake and Peddles |
||||||||||||
Step 01: Make a
reinforcement ring and and press on the VA-107 Breal resevoir. See 32.02 for more information 09/22/13 |
|||||||||||||
Step 02: Make two
center support panels, one left and one right as shown. Note: The support panels will hold the parking brake valve and help with the engine mount Reinforcement. 12/01/13 |
|||||||||||||
Step 03: Install
parking brake valve on the right side support panel and hook up the
brake lines. 01/19/14 |
|||||||||||||
Step 04: A closer look. 01/19/14 |
|||||||||||||
Page 11.02 - Parking Brake |
|
Flush Rivets | Stab Fairings | Static Air | Canopy Lock | Battery Location | Wing Tanks | Rear Windows | Engine | Seat Adjustment |
Seat Brace | Brake System | Electric Flaps | Rudder Trim | Panel | Builders Log |
|
||||||||||
Disclaimer : Information contained on this Site may be out of date and /or inaccurate - Please Confirm any important data with a reliable source. |