Vans RV Builders List
Vans Parts Joes RV 10
EAA FAA
Sun n Fun FAA Registry
Oshkosh NTSB
Home Empennage kit Wing Kit Fuselage Kit Finish Kit Power Plant Kit Avionics Paint Interior Home
Home Alterations Vendors Builders Log  Home
Alteration 13: Rudder Trim
13.01                    
Alteration 13 Page 01 NOTE: Any alteration will require it to be registered as Experimental-Amateur Built  E-AB
Parts
     
     
     
     

This Alteration is to add Rudder Trim

Step 01: Make the adjustment knob.
Step 02: Make the spring slide.
Step 03: Mill the spring slide.
Step 04: Make the adjustment and the spring slide guides.
Step 05: The parts.
Step 06: The parts assembled.
Step 07: Installed.
Step 08: Installed.
Step 09:  
Step 10:  
Page 13.01
13.01                    
01: Flush Rivets 02: Stab Fairings 03: Static Air / Pitot 04: Canopy Lock / Lift  05: Battery Location 06: Fuel Tanks
07: Rear Windows 08: Engine 09: Seat Adjustment 10: Seat Brace 11: Brake System 12: Electric Flaps
13: Rudder Trim 14: Tailcone Fairing 15: Wing Skin Stiffeners 16: Wing Tip Lights 17: Rear Baggage 18: Tailcone Camera
19: Tailcone Stiffeners 20: Tie Down Rings 22: Vent Door Knobs      
           
Drill Chart Tap Chart Bolt Chart Nut Chart Rivet Chart Washer Chart Rod Ends Vendors Shop Home
 

Disclaimer : Information contained on this Site may be out of date and /or inaccurate - Please Confirm any important data with a reliable source.