Vans RV Builders List
Vans Parts Vendors
EAA FAA
Sun n Fun FAA Registry
Oshkosh NTSB
Home Empennage kit Wing Kit Fuselage Kit Finish Kit Power Plant Kit Avionics Paint Interior Home
CENTER SECTION MID FUSE LOWER FUSE  SIDE SKINS ROLLOVER TAIL ATTCH  SEATS PEDALS FUEL FWD FUSE  BUILDERS LOG
Page  21.12 Mid Fuse Ribs & Bottom Skins     
21.01 21.02 21.03 21.04 21.05 21.06 21.07 21.08 21.09 21.10  
21.11 21.12 21.13 21.14 21.15 21.16 21.17 21.18 21.19 21.20  
Step 01: Separate the F-1203J Bulkhead Doubler by removing the hatched areas shown in Figure 1.  
Step 02: Rivet the 17 nutplates shown in Figure 2 to the F-1203 Bulkhead using the rivets called out. DO Not install a nutplate at either end of the top row of nutplates as indicated in the figure.  
Step 03: Rivet the F-1203J Bulkhead Doublers to the F-1203A Bulkhead using the rivets called out in Figure 2.  
   
VERTICAL STAB RUDDER ANTI-SERVO TAB  STABILATOR TAILCONE EMP ATTACH  EMP FAIRINGS  BUILDERS LOG

Note: This is my builders log and is not Intended to replace Vans Construction drawings

Disclaimer : Information contained on this Site may be out of date and /or inaccurate - Please Confirm any important data with a reliable source.