Page 21.03
Mid Fuse Ribs
& Bottom Skins |
|
|
Step 01: Rivet the F-1206A Bulkhead
to the F-1222-L & R and F-1223-L & R Baggage Ribs using the rivets
called out in Figure 1. |
 |
|
Step 02: Rivet the F-1206G-L & R
Baggage Ribs to the F-1206A Bulkhead and the F-1221-L & R Baggage Ribs
using the rivets called out in Figure 1. |
 |
|
Step 03: Dimple the holes in the
top flange of the F-1206H-L & R Baggage Ribs that correspond to the
dimpled holes in the F-1224-L & R Baggage Floors. |
|
|
Step 04: Rivet The F-1206H-L & R
Baggage Ribs to the F-1206A Bulkhead using the rivets called out in
Figure 1. |
|
|
Step 05: Rivet the F-1224-L & R
Baggage Floors to the F-1206A Baggage Bulkhead and F-1206H-L & R Baggage
Ribs using the rivets called out in Figure 2. |
|
|
Step 06: Dimple the ten nutplates
called out in Figure 2, then rivet them to the F-1206A Baggage Bulkhead,
F-1206H-L & R Baggage Ribs and F-1224-L & R Baggage Floors. |
 |
|
Step 07: Rivet the F-1206F Bearing
Bracket Brace to the F-1206A Bulkhead using the rivets called out in
Figure 3. |
 |
|
Step 08: Rivet the F-1206F Bearing Bracket Brace to the
F-1206G-L & R Baggage Ribs and Bearing Bracket Assemblies using the
rivets called out in Figure 3. The flush, manufactured heads of the
rivets in the bearing Bracket Assemblies are placed against the web of
the baggage ribs. |
 |
|
Step 09: Separate the F-1250 Pulley
Brackets by removing the hatched areas shown in Figure 4. |
 |
|
Step 10: Rivet the F-1250-L & R
Pulley Brackets to the F-1220A Forward Intercostal and F-1220B Aft
Intercostal using the rivets called out in Figure 5. |
|
Page 21.03
Mid Fuse Ribs
& Bottom Skins |
|
|
|
