Vans RV Builders List
Vans Parts Joes RV 10
EAA FAA
Sun n Fun FAA Registry
Oshkosh NTSB
Home Empennage kit Wing Kit Fuselage Kit Finish Kit Power Plant Kit Avionics Paint Interior Home
CENTER SECTION MID FUSE LOWER FUSE  SIDE SKINS ROLLOVER TAIL ATTCH  SEATS PEDALS FUEL FWD FUSE  BUILDERS LOG
Page 21.04
Mid Fuse Ribs & Bottom Skins
21.01 21.02 21.03 21.04 21.05 21.06 21.07 21.08 21.09 21.10  
21.11 21.12 21.13 21.14 21.15 21.16 21.17 21.18 21.19 21.20  
Step 01: Separate the F-129 Flaperon Mixer Arm by Removing the Hatched area shown in Figure 1.

08/05/12
Step 02: Rivet the two F-1218 Flaperon Mixer Brackets to the F-1220A Forward Intercostal and the F-1220B Aft Intercostal using the rivets called out in Figure 2.  
Step 03: Machine countersink the nutplate attach rivet holes in the F-1219A Flaperon Mixer Arm then attach the nutplates called out in Figure 2.  
Step 04: Bolt the F-1219A & B Flaperon Mixer Arms and the bushing called out in Figure 2 to the F1218 Flaperon mixer Brackets using the hardware shown. Torque the bolt enough to remove any slop or play, but still allow freedom of rotation.  
Step 05: Bolt the second longer bushing called out in Figure 2 between the F-1219A & B Flaperon Mixer Arms.  
Step 06: Separate the four F-1017C Seat Belt Attach Lugs, shown in Figure 3.

08/05/12
Step 06B: Separate the  two F-1216 Seat Belt Attach Lug Supports, shown in Figure 4, by removing the hatched areas shown.

08/05/12
Step 07: Remove the vertical strip of material from the lightening hole of each F-1215-L & R Seat Rib as indicated in Figure 6.

Builder Note: Removed strip with aviation snips and finish with drum sander in drill press

08/05/12
Step 08: Using F-1215-L & R Seat Ribs, F1017C-L & R Seat Belt Attach Lugs and F-1216-L & R Seat Belt Attach Lug Supports, cleco together four Seat Rib Assemblies; two right as shown in Figure 5 and two left as shown in Figure 6.  
Step 09: Final-Drill #30 the eight 1/8" dia. holes common to all the parts shown in Figures 5 and 6, then rivet them together using the rivets called out.

Drill 08/06/12

Rivet 08/10/12
Page 21.04
Mid Fuse Ribs & Bottom Skins
21.01 21.02 21.03 21.04 21.05 21.06 21.07 21.08 21.09 21.10  
21.11 21.12 21.13 21.14 21.15 21.16 21.17 21.18 21.19 21.20  
CENTER SECTION MID FUSE LOWER FUSE  SIDE SKINS ROLLOVER TAIL ATTCH  SEATS PEDALS FUEL FWD FUSE  BUILDERS LOG
Drill Chart Tap Chart Bolt Chart Nut Chart Rivet Chart Washer Chart Rod Ends Vendors Shop Home
Disclaimer : Information contained on this Site may be out of date and /or inaccurate - Please Confirm any important data with a reliable source.