|
Home | Alterations | Vendors | Builders Log | Home |
Alteration 17 Rear Baggage |
|
|||||||||||||||
Page 17.02 Making the Baggage support angles. | NOTE: Any alteration will require it to be registered as Experimental-Amateur Built E-AB. | |||||||||||||||
Parts
|
This Alteration is to add a baggage area in the tailcone for items required to pre-flight and tie down the aircraft. It will also help with the W&B problem caused by the six cylinder Jabiru Engine. |
|||||||||||||||
Step 01: Make the
bottom center/aft support angle. 09/17/17 |
||||||||||||||||
Step 02: Make the
bottom front support angle. 09/17/17 |
||||||||||||||||
Step 03: Make the top support angle. | ||||||||||||||||
Step 04: Make the
forward vertical support angle. 09/18/17 |
||||||||||||||||
Step 05: Make the rear vertical support angle. | ||||||||||||||||
Step 06: Install
the bottom center/aft , bottom front , top support angles. 09/17/17 |
||||||||||||||||
Step 07: Install
front and rear vertical support angles. 10/13/17 |
||||||||||||||||
Page 17.02 Making the Baggage support angles. |
|
|
|
||||||||||
Disclaimer : Information contained on this Site may be out of date and /or inaccurate - Please Confirm any important data with a reliable source. |