| Home | Empennage kit | Wing Kit | Fuselage Kit | Finish Kit | Power Plant Kit | Avionics | Paint | Interior | Home |
|
|
|||||||||||
|
|||||||||||
| Home | Alterations | Vendors | Builders log | Home |
| Alteration 20 Tie Down Rings |
|
|||||||||||
| Alteration18 Making the Parts | NOTE: Any alteration will require it to be registered as Experimental-Amateur Built E-AB | |||||||||||
|
Parts
|
This Alteration is to add tie down rings with a camera mount. |
|||||||||||
| Step 01: Turn down 2024 T3 Aluminum, thread 3/8" 16, drill and tap 1/4" 20. The first one was complete on 07/14/18 |
 |
|||||||||||
| Step 02: A little Mill Work. 07/14/18 07/16/18 |
 |
|||||||||||
| Step 03: Finished Tie Down Rings. Total of 5 made. One for the top of the wing will be used for a Camera Mount. 07/16/18 |
 |
|||||||||||
| Step 04: Test fit the
first one 07/15/18 |
 |
|||||||||||
| Alteration 20 Tie Down Rings |
|
|
|
|||||||||||||||||||||||||||||||
|
Disclaimer : Information contained on this Site may be out of date and /or inaccurate - Please Confirm any important data with a reliable source. |