Vans RV Builders List
Vans Parts Joes RV 10
Sun n Fun FAA Registry
Oshkosh NTSB
Home Empennage kit Wing Kit Fuselage Kit Finish Kit Power Plant Kit Avionics Paint Interior Home
Home Alterations Vendors Builders Log  Home
Alteration 09 Seat Ajustment
09.01 09.02                  
Alteration 09.01
Seat Floor Attachment
NOTE: Any alteration will require it to be registered as Experimental-Amateur Built  E-AB

This Alteration is to add seven Seat Ajustments

Step: 01 Drill 17 holes with a # 12 drill that correspond with the nutplates shown in step 02

Dimple the #30 holes in the area of the Nutplate assemblies.

Step: 02

Step: 03 Make the six nutplates assemblies as shown in the photo at the right.
Step: 04 The Nutplates assemblies will add 1/3/4 ounces each seat.
Step: 05 Rivet the nutplate assemblies to the right and left seat floors as shown in the photo at the right.
Alteration 08.01 Jab 3300
09.01 09.02                  
01: Flush Rivets 02: Stab Fairings 03: Static Air / Pitot 04: Canopy Lock / Lift  05: Battery Location 06: Fuel Tanks
07: Rear Windows 08: Engine 09: Seat Adjustment 10: Seat Brace 11: Brake System 12: Electric Flaps
13: Rudder Trim 14: Tailcone Fairing 15: Wing Skin Stiffeners 16: Wing Tip Lights 17: Rear Baggage 18: Tailcone Camera
19: Tailcone Stiffeners 20: Tie Down Rings 22: Vent Door Knobs      
Drill Chart Tap Chart Bolt Chart Nut Chart Rivet Chart Washer Chart Rod Ends Vendors Shop Home

Disclaimer : Information contained on this Site may be out of date and /or inaccurate - Please Confirm any important data with a reliable source.