| Home | Empennage kit | Wing Kit | Fuselage Kit | Finish Kit | Power Plant Kit | Avionics | Paint | Interior | Home |
|
|
|||||||||||
|
|||||||||||
| Home | Alterations | Vendors | Builders log | Home |
| Alteration 23 Seat Belts |
|
|||||||||||
| Alteration 22 Page 01 | NOTE: Any alteration will require it to be registered as Experimental-Amateur Built E-AB | |||||||||||
|
|
This alteration is to use custom seatbelts. |
|||||||||||
| Step 01: Make two
seatbelt support spacer brackets, one left and one right. 09/19/19 |
 |
|||||||||||
| Step 02: Make two
seatbelt attach brackets, one left and one right 09/19/19 |
 |
|||||||||||
| Step 03: Drill and
shape the attach brackets. 09/22/19 |
 |
|||||||||||
| Step 04: Back in the lathe to do some finial shaping. |
 |
|||||||||||
| Step 05: Finished seatbelt attached brackets. |
 |
|||||||||||
| Step 06: The finished
seatbelt anchor points. 09/23/19 |
 |
|||||||||||
| Step 07: | ||||||||||||
| Step 08: | ||||||||||||
| Alteration 22 Page 01 |
|
|
|
||||||||||
|
Disclaimer : Information contained on this Site may be out of date and /or inaccurate - Please Confirm any important data with a reliable source. |